Introduction
Are you looking for an effective solution to prevent corrosion and oxidation in electrical connections? If so, you may have heard about Noalox, an anti-oxidant compound.
But how to use Noalox anti-oxidant compound?
First, clean the conductor off with a wire brush or emery cloth. Then apply Noalox freely to both the conductor and the connector. Assemble the joint and wipe off the excess compound. It is important to use the compound as directed and to follow any safety precautions listed on the package.
Keep reading to learn helpful tips for applying it correctly for optimal results. Let’s get started!
How to Use Noalox Anti-Oxidant Compound
This section will give you step-by-step instructions on how to use Noalox Anti-Oxidant Compound. But before applying Noalox, consider the following safety cautions:
Safety Cautions
- Make sure that the electrical connection is clean from dirt, grease, or other contaminants.
- Wear gloves and protective gear to avoid skin contact.
- When using Noalox, make sure that the are is well-ventilated to avoid inhaling any fumes or vapors that may be released during application.
- Do not use a wire brush or abrasive to clean the connectors.
- Do not apply the compound directly to the connection.
Source: Home Depot
Step 1: Squeeze a small amount of Noalox onto a clean, lint-free cloth or brush. Ensure that you have a clean, dry cloth or brush that is free from any debris or lint.
Take the Noalox tube and gently squeeze a small amount of the compound onto the surface of the cloth or brush.
Step 2: Apply the Noalox to the electrical connection wires, ensuring that it is evenly distributed. Simply rub the cloth or brush over the surface of the connection, ensuring that it is coated with a thin layer of the compound.
Note that using too much can be counterproductive and cause issues down the line. You only need a thin layer of the compound and avoid applying too much.
Step 3: Once applied, reassemble the connection and tighten any screws or bolts.
Step 4: Wipe away any excess anti-oxidant compound with a clean cloth.
Step 5: Test the electrical connection to ensure that it is working properly.
After applying the Noalox, it is important to dispose of any excess compound and to properly clean the cloth or brush. It’s also important to note that Noalox should only be used on aluminum-to-aluminum or aluminum-to-copper electrical connections.
It should not be used on other metal combinations as it may cause corrosion.
Where Can You Use Noalox?
Noalox is an anti-oxidant compound that is commonly used in electrical applications. It is used to prevent oxidation and improve conductivity in electrical connections. Here are some of the common uses of Noalox:
Electrical connections
Noalox is often used to improve the conductivity of electrical connections and prevent oxidation. It is used particularly in aluminum-to-aluminum or aluminum-to-copper connections such as when wiring light bulbs weatherhead sockets
Circuit breakers
Noalox can be used to improve the performance and longevity of circuit breakers by preventing corrosion and improving conductivity. Interestingly, one user of Noalox has left a review stating that he used Noalox on the interior threading of his e-cig.
He noticed an increase in the e-cig conductive efficiency, resulting in better battery performance.
Transformers
Noalox is also used in transformers to prevent oxidation and improve the flow of electricity through the system.
Motors
Noalox can be used in motors to prevent corrosion and improve conductivity, which can help to extend the life of the motor.
Antennas
Noalox can be applied to the connections of antennas to prevent corrosion and improve signal quality.
Noalox is a versatile compound that can be used in a wide range of electrical applications even when troubleshooting hydro shark boiler problems. It can be used to improve performance, prevent corrosion, and extend the life of electrical components.
Di-electric grease Vs Noalox
Di-electric grease and Noalox are two of the best products used in electrical connections to prevent corrosion and improve conductivity. But how can you know if you should use Di-electric grease or Noalox?
Here is a table featuring their differences.
Factors | Di-electric grease | Noalox |
Applications | Automotive, marine, industrial, and high-voltage electrical applications | Automotive, marine, industrial, and low-voltage electrical applications |
Barrier | Provides a barrier against moisture, dust, and other contaminants | Provides a barrier against moisture, dust, and other contaminants |
Function | Insulates and prevents arcing in high-voltage connections | Prevents corrosion and improves conductivity in low-voltage connections |
Composition | Made from silicone or synthetic materials | Made from a blend of petroleum jelly and zinc particles |
Color | Typically clear or white | Typically gray or silver |
Consistency | Usually thicker and more viscous | Usually thinner and more fluid |
Usage | Applied thinly and evenly to mating surfaces | Applied sparingly to threads and connections |
Interchangeability | Not interchangeable with Noalox | Not interchangeable with di-electric grease |
While both products are used to protect electrical connections, they have different applications and properties. Di-electric grease is an insulator, while Noalox is an anti-oxidant compound that improves conductivity.
Where Not to Use Noalox?
Noalox shouldn’t be used for the following applications and situations:
High-voltage applications: Noalox is designed for use in low-voltage applications, typically up to 600 volts. It should not be used in high-voltage applications because it may break down, leading to flashover and electrical arcing.
Oxygen service: Noalox contains petroleum-based products, which can ignite in the presence of high concentrations of oxygen. It should not be used in applications involving oxygen service.
Food or medical applications: Noalox is not recommended for use in applications involving food or medical equipment. That is because it may contain trace amounts of toxic substances that could be harmful if ingested or absorbed.
FAQs
Is Noalox Petroleum Based?
Yes, Noalox is a petroleum-based anti-oxidant compound. It is a blend of petroleum-based oils and particles of metallic zinc and aluminum. These ingredients work together to provide protection against oxidation and corrosion in electrical connections, especially in harsh and corrosive environments.
Can You Use Noalox On Copper?
Yes, Noalox can be used on copper. In fact, it is commonly used on copper and other metals to prevent corrosion and oxidation in electrical connections. Noalox is a useful product for improving the efficiency and longevity of electrical connections, including copper-to-copper connections.
Does Noalox Dry After Application?
Noalox doesn’t dry after application. It is a non-drying compound that remains in a paste-like/greasy state after it is applied to electrical connections. The paste-like consistency of Noalox also helps to provide a good electrical connection between two surfaces.
Bottom Line
Finally, you must agree that the Noalox anti-oxidant compound is a valuable tool for anyone working with aluminum electrical connections. It helps prevent oxidation and corrosion, ensuring a strong and reliable electrical connection.