Introduction 

Grizzly and DeWalt both are popular brands for table saw, and their specifications of them also seem similar at the first glance. So, people often suffer in a dilemma about which one they should buy. 

So, Grizzly G869 vs DeWalt – which one should you go for? 

Grizzly G0869 has a left tilt direction while the DeWalt is a right tilt direction. This makes Grizzly suitable for bevel cuts while with DeWalt, the measurement is easier. Unlike  DeWalt, Grizzly has a variable Arbor speed, which makes it easier to cut more variety of materials. DeWalt has more rip capacity and a longer warranty than Grizzly. Grizzly is more budget-friendly than DeWalt.  

To know more about the differences between these table saws, keep reading. 

Grizzly G0869 vs DeWalt: Quick Comparison 

For this comparison, let’s take the DeWalt DWE7491RS table saw. The Grizzly G0869 and DeWalt DWE7491RS are almost similar in many different aspects. 

For example, they both have,

• Motor Power: 2 HP, 15 A
• Blade Diameter: 10 inches
• Max Cut Depth: 3 ⅛  inches at 90°, 2 ¼  inches at 45°
• Maximum Width of Dado: 13/16 in
• Fence rail style: rack & pinion

Now, let’s see apart from so many similarities, what makes them different. Here’s a quick comparison between them. 

Grizzly G0869 Vs DeWalt: In-depth Comparison 

This in-depth discussion on Grizzly G0869 vs DeWalt DWE7491RS will help you understand their differences even better. 

Blade Tilt Direction

Grizzly G0869 has a left blade tilt direction whereas the DeWalt DWE7491RS has a right blade tilt direction. The tilt direction means the direction from where the blades come through while cutting.

Since the DeWalt DWE7491RS has a right blade tilt direction, the blade tilts to the right when making angled cuts. This type of saw is better suited for making cutting miters. 

Source: Tool Box Buzz

Another advantage of the Dewalt saw is, the scale on the rip fence always reads the distance accurately between the fence and the right side of the blade. So, if you need precise measurements for your project or are a beginner, Dewalt is a better table saw for you. 

On the other hand, The Grizzly G0869 has a left blade tilt direction, so the blade tilts to the left when making angled cuts. This type of saw is well-suited for making bevel cuts, which are angled cuts across the width of a board. 

In this tilt direction, the object you are cutting doesn’t get trapped under the blade and has enough space to escape from the left side. 

Maximum Rip Capacity

The maximum rip capacity of grizzly G0869 is 28 inches, while for DeWalt, it is 32 ½  inches. The maximum rip capacity of a table saw is the maximum distance between the blade and the fence edge or the maximum width of the board. 

The DeWalt table saw has a wider rip capacity than Grizzly G0869. This extra capacity is useful when cutting larger pieces of wood or other cutting material.

Table Size

The table size of Grizzly G0869 is bigger than  DeWalt DWE7491RS. The extra table space in Grizzly can give you room for storage to keep your tools. 

If you are someone who always requires extra storage while working, you can consider having good shelving. Although Gladiator and Husky’s shelvings have many differences, both are good options.

Arbor Speed

The Grizzly G0869 has a variable arbor speed of 2000-4000 RPM, on the other hand, the DeWalt DWE7491RS has a fixed speed of 4800 rpm. The arbor speed of a table saw is the speed at which the saw blade rotates on the arbor. Table saw RPM  matters a lot. 

The DeWalt table saw has a faster arbor speed. So, it will help you cut more efficiently, especially the materials which require higher RPM, like wood. A table saw with a higher arbor speed also extends the blade life. 

However, a higher arbor speed is not always a good thing. Some specific materials require a slower speed to cut efficiently. For example, if you are cutting plastic materials and the RPM is high, there’s a chance the plastic will melt. 

Also, some specific materials including aluminum require a higher speed to cut, usually 3000 RPM. For these projects, a variable arbor speed feature is very important. Unlike DeWalt, you will get this feature on Grizzly.

Weight

The weight of the grizzly g0869 table is only 65 pounds while the DeWalt DWE7491RS is 90 pounds. As both are portable table saws, you want to carry them here and there. In this case, the Grizzly table saw will be more efficient to transport than DeWalt. 

Source: Reddit 

Warranty

With Grizzly g0869 you will get only 1 year of warranty, on the other hand for the DeWalt table saw, you will get 3 years of warranty. If you face any problem including the saw blade wobbling problem, you can get service from the manufacturers. 

Price

When it comes to price, the Grizzly is more budget-friendly than the DeWalt. Grizzly is more than 100 bucks cheaper than Dewalt. 

Grizzly G0869 Vs DeWalt: Which One Should You Choose? 

If you are a beginner or need precise measurements for your cuttings, DeWalt is a better choice for you. It is also suitable for cutting larger pieces of materials or materials that require higher RPM. 

DeWalt is a good option for you if you like to have assurance of quality from the manufacturer. 

In contrast, if you are looking for a budget-friendly or easily portable table saw option, Grizzly G0869 is for you. If you have customized arbor speed recommendations, then this option is better for you. 

FAQs

What Is Rack And Pinion Fence?

Rack and pinion is a special type of fence in which the rack is attached to the fence, instead of being removed. Here the pinion slides through the rack using the gear which helps keep the fence on track without moving. 

What Is The Best Blade Diameter For A Table Saw?

A 10-inch blade is considered the best and most versatile size of a table saw. It is suitable for most cutting projects including crosscuts, rips, and angled cuts. But if you need to cut thicker or larger workpieces than 1-1/4-inch, blades, such as 12-inch or 14-inch, are ideal.

What Is A Dado On A Table Saw?

Dado is a special kind of blade in a table saw that cuts Dado grooves. Dado grooves are channels cut into the surface of wood or steel to create a rail that can be used for a variety of purposes, such as joinery or decoration.

Conclusion 

That’s all about the discussion on Grizzly G0869 vs DeWalt. I hope this cleared your dilemma about which table saw is most suitable for you. Match your cutting project requirements with the specifications and you won’t regret the decision. 

Now, it’s time for me to go. Have a great day!